Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and car operation



Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
+ Brake system
- Forward and back bridges, running gear and steering
   + Peredny Bridge and suspension bracket
   + Forward suspension bracket of spring type
   + the Forward suspension bracket on screw springs
   + Back bridge and suspension bracket
   + Back suspension bracket of spring type
   + the Back suspension bracket on screw springs
   - Steering
      Primary checks
      The elementary checks and adjustments
      Removal and installation of a steering wheel
      Service of a steering column
      Removal and installation of the flexible coupling of a steering shaft
      Service of assembly of the steering mechanism
      Removal and installation of the steering pump
      Service of components of a steering drive
      Removal and installation of a steering damper
      Service of the pendular lever of cross-section steering draft
      Corners of installation of forward wheels (geometry of a forward suspension bracket and steering drive)
+ Body
+ Onboard electric equipment



Removal and installation of a steering damper

Utilitya's (Van) models (Utility) and Mini-truck (Cab Chassis)

Removal

 PERFORMANCE ORDER

  1. To Poddomkratta a car front also establish it on props. Mark the provision of a reference point of a steering damper on the car chassis (location of a steering damper on Utilitya's (Van) models and the Mini-truck is shown on an accompanying illustration).
1 — the pendular lever of cross-section steering draft
2 — a steering damper
3 — connecting draft
4 — longitudinal steering draft
  1. Give nuts of fastening of a steering damper to the chassis and cross-section steering draft.
  2. Remove a steering damper from the car, trying not to damage thus rubber plugs.
  3. Undertake a steering damper for both ends and several times completely compress it, stretching then against the stop. If during a damper breakthroughs and jamming points are observed, it is necessary to replace it.
  4. Examine a damper outside on existence of traces of leakages of liquid, dents and other damages. In case of need make replacement.
  5. Estimate a condition of rubber plugs, in case of need replace them.

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

  1. Track combination of the landing labels of reference points of a damper put in the course of dismantle.
  2. Strongly tighten fixing nuts.







;