Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and car operation


Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
+ Brake system
+ Forward and back bridges, running gear and steering
+ Body
- Onboard electric equipment
   The elementary diagnostic equipment and examples of its application
   Removal and installation of the press button of a horn
   Switches
   Alarm and lighting devices
   Removal and installation of a combination of devices
   Service of the sensor of a speedometer
   Audiosystem service
   Removal and installation of the motor of the fan of a heater
   Service of cleaners of a windscreen
   Service of a cleaner of back glass
   Safety locks, fusible inserts and relay
   Electroconducting of a food of electric equipment of the trailer
   Schemes of electric connections
   + Appendices





Service of the sensor of a speedometer

Removal and installation

 PERFORMANCE ORDER

    Disconnect a negative wire from the battery. To Poddomkratta a car back also establish it on props. Working under the car, disconnect electroconducting from the speedometer sensor (location of the sensor is shown on an accompanying illustration - on an insert the arrangement of plugs of the socket is shown).
1 — a transfer case
2 — the sensor
    Establish under a lengthening casing suitable capacity for collecting oil which can start to follow at removal of the sensor from a transfer case. Examine a teeth of a driving gear wheel on existence of signs of wear, chips and other damages. In case of need make replacement.

Installation is made upside-down.

Check of serviceability of functioning

 PERFORMANCE ORDER

    Connect the voltmeter to plugs of the electric socket. Establish the device in a mode of measurement of tension of an alternating current, quickly крутаните a speedometer drive clockwise and consider the voltmeter indication. The result should make about 0.5 Century. In case of need replace the sensor.