Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and car operation


Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
+ Brake system
+ Forward and back bridges, running gear and steering
+ Body
- Onboard electric equipment
   The elementary diagnostic equipment and examples of its application
   Removal and installation of the press button of a horn
   Switches
   Alarm and lighting devices
   Removal and installation of a combination of devices
   Service of the sensor of a speedometer
   Audiosystem service
   Removal and installation of the motor of the fan of a heater
   Service of cleaners of a windscreen
   Service of a cleaner of back glass
   Safety locks, fusible inserts and relay
   Electroconducting of a food of electric equipment of the trailer
   Schemes of electric connections
   + Appendices



Cocktail

Service of a cleaner of back glass

Removal and installation of a brush and working element

Procedures are similar described for windscreen cleaners (see an accompanying illustration).

Removal and installation of the lever of a screen wiper

Removal

 PERFORMANCE ORDER

    Remove from a back door a spare wheel. Remove a protective cover and give a nut of fastening of the lever on an axis.
    Having carefully hooked, remove the lever from an axis (see an accompanying illustration).

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

    Put on the lever an axis and level a brush, having arranged it in 55 ÷ 65 mm over a sealing tape of glass. The motor should be brought into parking situation previously. Strongly tighten a nut of fastening of the lever on an axis.

Removal and installation of the motor of a drive of a screen wiper

Removal

 PERFORMANCE ORDER

    Disconnect a negative wire from the battery. Remove the screen wiper lever. Remove the panel of internal furnish of a door of a back. Disunite the electric socket on the motor. Give fixing bolts (see an accompanying illustration) and remove the motor from the car.
1 — a bolt
2 — the electric socket
3 — the screen wiper motor

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

    Check quality of contacts of the electric socket and track reliability of its fastening. Strongly tighten bolts of fastening of the motor. Adjust the provision of a brush on glass.