Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and car operation

Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
+ Brake system
+ Forward and back bridges, running gear and steering
- Body
   Care of a body
   Removal of spots of a various origin from a vinyl upholstery and panels of furnish of salon
   Care of an upholstery and salon rugs
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Replacement of a windscreen and the fixed windowpanes
   Service of forward doors
   Service of back doors
   Removal and cowl installation
   Service of doors of a back of models Hardtop (Hardtop) and Versatile person (Station Wagon)
   Service of a door of a back of models of Utilitya (Van) (Utility)
   Removal and front grille installation
   Removal and installation of the central console
   Removal and installation of forward seats
   Removal and installation of a back seat
   Service of seat belts
   Removal and dashboard installation
+ Onboard electric equipment

Removal and cowl installation



    Lift a cowl and fix it an emphasis. Cover mudguards of both wings with special covers or simply old blankets for protection of a paint and varnish covering. Special attention give to protection located under corners of a cowl of sites.
    Disconnect a hose of supply of liquid of washing of a windscreen from hoses on a cowl (see an accompanying illustration).
    Marker lead round plates of loops, having marked their arrangement on a cowl. Give bolts of fastening of plates of loops to a cowl, remove washers. By means of the assistant remove a cowl from the car.



    By means of the assistant establish a cowl on the car, having fixed it in front an emphasis. Screw fastening bolts to a cowl of plates of loops (do not forget to establish under their heads of a washer). Level loops according to the landing labels put in the course of dismantle, after it can strongly tighten bolts. Ask the assistant to hold the cowl lock in open situation by a driving cable, close a cowl. Check correctness of an arrangement of lateral edges of a cowl in relation to wings of the car and back edge in relation to the body panel. In case of need adjustments weaken bolts of fastening of loops to a cowl and as appropriate correct the provision of a cowl. Check serviceability of functioning of the lock of a cowl. At a lock otpuskaniye the cowl should rise slightly breakthrough, allowing to reach fingers a latch clamp. For adjustment of the lock weaken fixing bolts (see an accompanying illustration) and shift the lock in the demanded direction. Tighten bolts.
1 — the lock
2 — bolts