The device, service, repair Nissan Patrol and Ford Maverik - Removal and installation of an air purifier and a pyleotdelitel of preliminary cleaning//1988-1997 / elektrik-m.ru

Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and car operation



Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating and air conditioning
- Power supply system and production of the fulfilled gases
   - Power supply system of carburetor engines (3.0 l and early 4.2 l)
      Removal and installation of an air purifier and pyleotdelitel of preliminary cleaning
      Removal and installation of the fuel filter
      Carburetor service
      Service of the fuel pump
      Service of the electromagnetic valve of return of fuel - only models of 3.0 l
      Service of a cable of a drive of a butterfly valve
      Service of a cable of a manual drive of a butterfly valve
      Service of a fuel tank
   + Systems of injection of fuel (EFI) and engine management - models of 4.2 l of release after 1992.
   + System of production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
+ Brake system
+ Forward and back bridges, running gear and steering
+ Body
+ Onboard electric equipment




Removal and installation of an air purifier and pyleotdelitel of preliminary cleaning

Scheme of placement of components of an airintaking path

Removal

 PERFORMANCE ORDER

  1. Turn on one or more nuts lambs of fastening of the top cover of assembly of an air purifier (components of an air purifier of the engine of 4.2 l are presented on an accompanying illustration).
1 — the top cover
2 — nuts lambs
3 — a filtering element
4 — the device of pauperization of a mix idling at the heated-up engine
5 — the thermostatic valve
6 — the case
  1. Release clips of fastening of a cover.
  2. Remove the top cover and take from the air purifier case filtering element.
  3. Give a bolt of fastening of an air inlet of an air purifier to heater assembly.
  4. Disconnect from a cover of a head of cylinders a ventilating hose of an air purifier.
  5. Give bolts of fastening of an arm of an air purifier.
  6. Raise an air purifier, then disconnect from it vacuum hoses, previously having marked them with identification labels.
  7. Remove air purifier assembly from the car.
  8. Weaken a collar of fastening of an air line of a pyleotdelitel.
  9. Give fixing bolts and remove from the car heater assembly.
  10. Give bolts of fastening of a pyleotdelitel to a mudguard. Remove a pyleotdelitel from the car.

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

  1. In case of need make air purifier service according to instructions.
  2. Track, that vacuum hoses were connected according to the identification labels put in the course of dismantle.







;