Nissan Patrol, Ford Maverick

1988-1997 of release

Repair and car operation


Nissan Patrol and Ford Maverik
+ Cars of the Nissan Patrol and Ford Maverick series
+ Diagnostics of malfunctions
+ Settings and routine maintenance
+ Engine
+ Systems of cooling, heating and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Transmission
+ Coupling
- Brake system
   Service of the main brake cylinder (GTTs)
   Service of the vacuum amplifier (servo-driver) of brakes
   Service of forward disk brake mechanisms
   Service of back drum-type brake mechanisms
   Service of back disk brake mechanisms
   Pumping of hydraulic system
   Service of a pedal of a brake
   Removal and valve installation - a pressure regulator
   Service of the parking brake
+ Forward and back bridges, running gear and steering
+ Body
+ Onboard electric equipment





Removal and valve installation - a pressure regulator

Removal

 PERFORMANCE ORDER

    To Poddomkratta a car back also establish it on props.
    Disconnect from the valve a driving spring (location of the valve - a regulator of pressure is shown on an accompanying illustration).
    Disconnect from the valve brake tubes. To Zakuporta the open ends of tubes in order to avoid excessive losses of liquid and for the purpose of hit prevention in hydraulic system of dirt. Give fixing bolts and remove the valve from the car.

Installation

Installation is made upside-down.

 PERFORMANCE ORDER

    Tighten fixing bolts with demanded effort. Pump over brake system. Carry out trial runs of the car, checking serviceability of functioning of the valve - a pressure regulator. If when braking constantly there is a blocking of back wheels, it is necessary to give the valve to a workshop of dealer office of manufacturer for performance of adjustment of a driving spring.

Do not try to disassemble the valve at all!